Edge-trimming-, Inspection- and Recoiling lines (Georg)

Inspection lines:

For detection of strip surface defects by visual and automatic inspection systems
Possibility of eliminating strip defects with or without strip tension
Repair of coils by removal of defects and use of up-to-date welding machines
Edge-trimming of strips with faulty edges by extremely low cutting tolerances
Rewinding of solid coils by constant strip tension without offset
Minimization of scrap by use of steering roll systems and strip flow systems
Reduced power consumption by modern regenerative systems and use of drives in special power efficiency grades
Coil weight up to 40 t

TECHNICAL SPECIFICATIONS

PARAMETER NAME	VALUE
Strip width	more than 2.100 mm
Productivity	more than 300.000 t/year depending on product mix and strip material
Material thickness	0,1 − 6,0 mm
Belt movement speed	above 1.800 m/min

PARAMETER NAME	VALUE
Strip width	more than 2.100 mm
Productivity	more than 300.000 t/year depending on product mix and strip material
Material thickness	0,1 − 6,0 mm
Belt movement speed	above 1.800 m/min

PARAMETER NAME	VALUE
Strip width	more than 2.100 mm
Productivity	more than 300.000 t/year depending on product mix and strip material
Material thickness	0,1 − 6,0 mm
Belt movement speed	above 1.800 m/min

PARAMETER NAME	VALUE
Strip width	more than 2.100 mm
Productivity	more than 300.000 t/year depending on product mix and strip material
Material thickness	0,1 − 6,0 mm
Belt movement speed	above 1.800 m/min