Cleaning units ULM (Eurolls)

This unit is designed to clean the wire when it exits the dry wire drawing process, specially used in the stainless steel wire production.

It is installed at the exit side of the wire drawing machine, upstream from the wire collection station (spool / coil winding). It can be positioned in a straight line or “U” shape, depending on the available space. The number of modular stages is defined according to the maximum required treatment speed and the quality of the cleaning process.

Standard configuration (to ensure the speed of 20m/s) includes the following:

  • Motorized helical brushing (3 stages, electric motors 0,33 kW each)
  • Surface washing by abrasive pads in a hot water detergent mixture at temperature 70˚С (3 stages with two tanks with 6 kW and 3,5 kW heating elements and recirculation pumps)
  • Possible wire deflecting unit for “U” turn of the line (for reversing process direction)
  • Air wipes drying (2 stages)
  • Hot air drying tunnel in countercurrent direction (2.500 mm in length, 2 air blowers with a temperature of about 500˚, with a power of 3,3 kW each)

TECHNICAL SPECIFICATIONS

PARAMETER NAME
VALUE
Maximum speed

30 m/s

Material for cleaning up

dry drawn stainless steel

Diameter

0.8 – 1.6 mm

Max. residue

0.3 g/m2

TECHNICAL SPECIFICATIONS

PARAMETER NAME
VALUE
Maximum speed

30 m/s

Material for cleaning up

dry drawn stainless steel

Diameter

0.8 – 1.6 mm

Max. residue

0.3 g/m2

TECHNICAL SPECIFICATIONS

PARAMETER NAME
VALUE
Maximum speed

30 m/s

Material for cleaning up

dry drawn stainless steel

Diameter

0.8 – 1.6 mm

Max. residue

0.3 g/m2

TECHNICAL SPECIFICATIONS

PARAMETER NAME
VALUE
Maximum speed

30 m/s

Material for cleaning up

dry drawn stainless steel

Diameter

0.8 – 1.6 mm

Max. residue

0.3 g/m2

Contact us